Welcome to the Irish Mini Owners Club Forum. Keep an eye out of on coming events!!!!
1981 Mini City 1000
Moderators: spud1979, The Marcos Graveyard, Moderators
-
ctwomey
- NON Member
- Posts: 332
- Joined: Thu Jan 03, 2019 9:44 am
- Whats your location?: Ballybrittas, Co. Laois
- Region: Eastern
- What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
- Contact:
Re: 1981 Mini City 1000
I managed to get the inside of the roof painted with epoxy today. I sanded the inside of the roof yesterday and also treated it with a phosphoric acid-based rust remover to kill off the microscopic rust particles. The settings on the spray gun are spot on now. No runs this time.
-
ctwomey
- NON Member
- Posts: 332
- Joined: Thu Jan 03, 2019 9:44 am
- Whats your location?: Ballybrittas, Co. Laois
- Region: Eastern
- What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
- Contact:
Re: 1981 Mini City 1000
I painted the roof today with epoxy. It can be tricky to get the paint fully into the rain channels. I will have a few touch-ups once the paint is cured and sanded. The shine from the epoxy highlights all the imperfections in the metalwork too. At least it is properly sealed now.
-
ctwomey
- NON Member
- Posts: 332
- Joined: Thu Jan 03, 2019 9:44 am
- Whats your location?: Ballybrittas, Co. Laois
- Region: Eastern
- What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
- Contact:
Re: 1981 Mini City 1000
I painted a bit more epoxy primer today, both the inner wings on the shell and the wings themselves. It's time to take the mini off the rotisserie and start fitting the boot and doors before welding the skins on.
-
ctwomey
- NON Member
- Posts: 332
- Joined: Thu Jan 03, 2019 9:44 am
- Whats your location?: Ballybrittas, Co. Laois
- Region: Eastern
- What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
- Contact:
Re: 1981 Mini City 1000
I have skinned the doors and boot and am in the process of perfecting the fit before I repaint them with epoxy.
To get the boot to fit properly at the hinges, I made a tool to manually adjust the lower boot panel that works a treat.
To get the boot to fit properly at the hinges, I made a tool to manually adjust the lower boot panel that works a treat.
-
ctwomey
- NON Member
- Posts: 332
- Joined: Thu Jan 03, 2019 9:44 am
- Whats your location?: Ballybrittas, Co. Laois
- Region: Eastern
- What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
- Contact:
Re: 1981 Mini City 1000
I needed to add a few shims to get the gaps right, but happy with the driver's side
Good lines with the outer sill
Good lines with the outer sill
-
ctwomey
- NON Member
- Posts: 332
- Joined: Thu Jan 03, 2019 9:44 am
- Whats your location?: Ballybrittas, Co. Laois
- Region: Eastern
- What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
- Contact:
Re: 1981 Mini City 1000
Tweaking on the passenger side is giving good lines
Gaps are good
But the bottom hinge is pushing the bottom of the door in too far, so I may need to rework the holes
Gaps are good
But the bottom hinge is pushing the bottom of the door in too far, so I may need to rework the holes
-
Billy
- IMOC Paid Member
- Posts: 4651
- Joined: Mon May 09, 2005 12:49 pm
- Whats your location?: Roscommon
- Region: Western
- What Minis have you?: 1967 Morris Cooper, 1967 Austin Mini auto, 1968 Wolseley Hornet x2, 1981 Clubman Estate
- Location: Roscommon
- Contact:
Re: 1981 Mini City 1000
Fair play, it must take great patience.
-
ctwomey
- NON Member
- Posts: 332
- Joined: Thu Jan 03, 2019 9:44 am
- Whats your location?: Ballybrittas, Co. Laois
- Region: Eastern
- What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
- Contact:
Who is online
Users browsing this forum: Ahrefs [Bot] and 0 guests
