Welcome to the Irish Mini Owners Club forum. Celebrating 30 years of the Irish Mini Owners Club, 60 years of the Mini, 50 years of the Clubman and 20 years of our flagship event MTM
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
Bought this burr in Wurth in Portlaoise to tidy between the corner of the rain gutter and the vertical seam on the rear panel.
It cleaned it up really nicely and it was super sharp.
Next up is rebuilding the lip on the corner patch from the donor roof. I have finished welding the lip but this week I will need to reshape the edge and tidy up the visible weld on the other side.
If you are at the Portlaoise Classic Car Show with your Mini and you see someone examining your roof gutters in great detail it's probably me ... so apologies in advance
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
colinf1 wrote: ↑Mon Oct 30, 2023 4:06 pm
You don't see too many of them about with that original style grille.
How close you hoping to get to original spec?
I think you said that you'd be adding a few essentials like temp and oil gauges....
The car didn't come with a grill so might have to go looking for one. Alternatively, there is a black 11-slat one that Mini Spares do.
Other changes will be chrome bumpers, mirrors and wiper blades. The Interior will be the same except I will need to find a way to mount the oil pressure and water temp gauges. The oval centre console might be the easiest solution, but would prefer to retain the round one.
I will have to change the wheels as I have Cooper S discs and wider rear drums, so either Cooper S steel wheels or a suitable alloy that doesn't require arch extensions. 4.5 x 10 or 4.75 x 10.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
Marktoby wrote: ↑Tue Oct 31, 2023 2:22 pm
Only new to the group, and to Mini ownership so I'm playing catch up on the work you've done, but its exceptional. Great work.
Thanks a million. There is a wealth of knowledge and support on the board so please don't hesitate to ask questions.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
I have been busy studying for exams of late and haven't had time to finish the roof on the mini. Exams are completed now. I spent the last couple of days on the mini and have completed the rear passenger corner of the roof.
The series of photos shows how I approach the weld.
Keeping a ~1mm gap and keeping the panels cool is the secret to preventing warping. But it's impossible to make it perfect when you can't get access to the back of the panel.
I always start on one side and tack as I go along to the other. This way the panel can expand and contract as it heats up and cools down.
It's all about keeping it cool once it is completely tacked and locked in place.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
I haven't been posting much on the progress lately but I have been working away on the bodywork over the last few weeks.
Finally finished the roof and here is the last section welded in place. I have joined up the two panels as I am hoping to not have any plastic trim on the gutters.
I trial-fitted the petrol tank and have located the position for the petrol tank bracket.
Welded the closing panel in place and plug-welded the petrol tank bracket in place.
While it is not spot welded in place it looks stock and original.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
I used rattle cans of zinc rich primer, followed by gloss black top coat. The 2K epoxy would give off nastier fumes if welded nearby, both probably have the same chance of catching fire.
For cavity wax, you can get to the majority of the sill through each flute and the heelboard captive nuts, scuttle closer can be got to from down the A-pillar and I think you can get to the drivers side of the rear valance through the fog light wiring hole, can't remember if there is a similiar hole on passenger side.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
Thank Colin, I think the rear valence can be got from underneath too. I don't plan on putting the original fog light back on the car. I bought an earlier valence without the holes and nut for the external fog light.
ctwomey wrote: ↑Thu Apr 18, 2024 9:03 am
Thank Colin, I think the rear valence can be got from underneath too. I don't plan on putting the original fog light back on the car. I bought an earlier valence without the holes and nut for the external fog light.
Mine has a hole each side of the boot floor, but I've figured out its because its a full new boot floor that was based on the later MPi mini.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.