Welcome to the Irish Mini Owners Club Forum. Keep an eye out of on coming events!!!!
project "red devil"
Moderators: spud1979, The Marcos Graveyard, Moderators
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
project "red devil"
right iv had this project a while now but never started at thread so i said since iv the engine got its full steam a head
right lets start, i wanted a project to learn more about minis and the way they work (did he both mini hanyes books but you'll learn nothing out of a book!). so i looked on here but nothing was happening so looked on donedeal and seen red devil in dublin so i rang and asked all the questioned and needed and went to look at it as mam was shopping better than sitting on a bench in liffey vally. looked and the car and i was amazed with it, one rust spot yes i mean one but there was a catch had no engine but that didn't bother me, a perfect shell is hard to find now a days. while still in school got dad to drive up during the week and get it, that was one long day at school
when i got it home gave it a good look over and seen a few dents on the roof from being in 10-15 years dry storage so have them filled in and also filled in the holes for the bonnet badge plan on getting a transformers sticker for there
anyway pictures are more interesting ........
day i got it :
trial fit of grille arches and mirrors, windows also out for headlining. ( by the way does anyone have one ??)
donor engine (thanks joe) ready to come out:
liftng set up i had and used worked grand
dodgy repair on the exhaust when taken out :
engine out and ready to clean(have her well trained:lol:) had her do that while i put the car back out its wheels
was amazed how well the engine cleaned up but it won't be staying yellow and sliver, will be having it red and black just like the outside Colour scheme.
any advice and thoughts are welcome
more will follow as the project goes thanks for reading this far
right lets start, i wanted a project to learn more about minis and the way they work (did he both mini hanyes books but you'll learn nothing out of a book!). so i looked on here but nothing was happening so looked on donedeal and seen red devil in dublin so i rang and asked all the questioned and needed and went to look at it as mam was shopping better than sitting on a bench in liffey vally. looked and the car and i was amazed with it, one rust spot yes i mean one but there was a catch had no engine but that didn't bother me, a perfect shell is hard to find now a days. while still in school got dad to drive up during the week and get it, that was one long day at school
when i got it home gave it a good look over and seen a few dents on the roof from being in 10-15 years dry storage so have them filled in and also filled in the holes for the bonnet badge plan on getting a transformers sticker for there
anyway pictures are more interesting ........
day i got it :
trial fit of grille arches and mirrors, windows also out for headlining. ( by the way does anyone have one ??)
donor engine (thanks joe) ready to come out:
liftng set up i had and used worked grand
dodgy repair on the exhaust when taken out :
engine out and ready to clean(have her well trained:lol:) had her do that while i put the car back out its wheels
was amazed how well the engine cleaned up but it won't be staying yellow and sliver, will be having it red and black just like the outside Colour scheme.
any advice and thoughts are welcome
more will follow as the project goes thanks for reading this far
-
- NON Member
- Posts: 447
- Joined: Wed Jun 22, 2005 7:05 pm
- Whats your location?: Mayo.
- Region: Western
- Contact:
Re: project "red devil"
Wow! that was some find!
After looking at the 1st pic, if you had said "this is how it looked after the respray" no one would doubt you!
After looking at the 1st pic, if you had said "this is how it looked after the respray" no one would doubt you!
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
Re: project "red devil"
10 years under a gazebo
original paint on every panel bar the doors must have rotted out
original paint on every panel bar the doors must have rotted out
- joebe1
- NON Member
- Posts: 1081
- Joined: Mon Jan 15, 2007 12:41 am
- Whats your location?: Carrick on shannon
- Region: Western
- What Minis have you?: 1980 mini saloon (fip) 1275cc
1969 Clubman gt historic rally car, 1380 c/r s/c dog box, split 45 webbers
1980 irish clubman estate
1969 mk2 retro rally car 1293 s/c gearbox - Location: roscommon
- Contact:
Re: project "red devil"
Good man joey, Serious project.
Re: project "red devil"
I was going to say its a nice winter project but knowing you, you'll have on the road in no time and your dead right only way to learn how a mini works is to get stuck in.
If it isn’t broke then it’s not a Mini
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
Re: project "red devil"
Should be rolling within the next month ad will be on te road as soon as possiable. Might have patchs of fillers and primer but it will be on the road
Its the only way to find out how they work ! You learning nothing out of a confusing book like the hanyes mannuel (impossible to find anything in that book )
Its the only way to find out how they work ! You learning nothing out of a confusing book like the hanyes mannuel (impossible to find anything in that book )
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
Re: project "red devil"
Cleaning down the engine and preping for paint but how do i do under the gearbox winch it up and clean under it (dont like the idea of that) or turn it on its side ?
- CLUBMANGT
- NON Member
- Posts: 1076
- Joined: Fri Oct 23, 2009 8:59 pm
- Whats your location?: Leopardstown
- Region: Eastern
- What Minis have you?: 86 Mayfair 1000GT
- Modifications: 1275 and bar the shell and subframes new everything!! IMOC MEMBER
- Location: Leopardstown
- Contact:
Re: project "red devil"
Joey would ya ever stick her on the bus up to dubland I have a mankey engine under the bench , she might get stuck into for me
ALL YOU NEED IS POWER AND LOADS OF IT!!!
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
Re: project "red devil"
Update time
Have engine painted and in the car (no pics yet as its not finished:P )
I found out that i live painting engines and all the different bits would happly do it again
Have arches and sill strips fitted and waiting on wheels (auto jungle )
Will have to ring simon during the week to ask about spraying ect
Waiting on a few bits from mini spares, getting it all as a early birthday present hopefully it will be on the road by then
Its comming together well
Ps just to let ye know it was one of the cheapest engines ever
Pic of grille and stuff put on the show what it will look like, picture a gloss black roof and 10" revo's not sure if its up already but again wont hurt
Opinons and comment welcome
Have engine painted and in the car (no pics yet as its not finished:P )
I found out that i live painting engines and all the different bits would happly do it again
Have arches and sill strips fitted and waiting on wheels (auto jungle )
Will have to ring simon during the week to ask about spraying ect
Waiting on a few bits from mini spares, getting it all as a early birthday present hopefully it will be on the road by then
Its comming together well
Ps just to let ye know it was one of the cheapest engines ever
Pic of grille and stuff put on the show what it will look like, picture a gloss black roof and 10" revo's not sure if its up already but again wont hurt
Opinons and comment welcome
-
- NON Member
- Posts: 447
- Joined: Wed Jun 22, 2005 7:05 pm
- Whats your location?: Mayo.
- Region: Western
- Contact:
Re: project "red devil"
Red/black colour scheme is always a winner and 10" revo's will look perfect on it. Are you going with a black center on the revo's?
Classic 'n' Custom Minispares
Est. 2005
New and 2nd hand spares and accessories.
Nationwide Delivery. PayPal accepted.
http://www.classicncustom.ie
https://www.facebook.com/mini.spares.7
Est. 2005
New and 2nd hand spares and accessories.
Nationwide Delivery. PayPal accepted.
http://www.classicncustom.ie
https://www.facebook.com/mini.spares.7
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
Re: project "red devil"
Oh yes black centres
And hopefully it will be a different minI with the Colour scheme and the ritZ inteior
And hopefully it will be a different minI with the Colour scheme and the ritZ inteior
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
Re: project "red devil"
Fitting brakes and all shocks today and there wanting revo's
- macker
- NON Member
- Posts: 1950
- Joined: Mon May 23, 2005 5:30 am
- Whats your location?: THE FRIDGE
- Region: Aboard
- What Minis have you?: 110bhp 1968 mkII
- Modifications: NEW Custom flakey paint
- Location: The Fridge I told ye!!
- Contact:
Re: project "red devil"
do you mean a small Autobot one like this?joeyfinneran wrote:also filled in the holes for the bonnet badge plan on getting a transformers sticker for there
I still have one of them if you want it?
........ or are you a Decepticon?
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
Re: project "red devil"
Autobots all the way
Seen your one but im gona a black one with just black not like yours with all the colour
Seen your one but im gona a black one with just black not like yours with all the colour
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
Re: project "red devil"
nothing happening with this project lately as insurance tax and italy is coming fast
but I'm still putting some nice detailing on engine parts
but I'm still putting some nice detailing on engine parts
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
Re: project "red devil"
Sneak peek to engine bay
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
Re: project "red devil"
connecting all parts to engine and i must be missing something on gear linkage
with bleeding brakes should i do the rear or front first ?
and can dot 4 brake fluid be used for clutch too ?
with bleeding brakes should i do the rear or front first ?
and can dot 4 brake fluid be used for clutch too ?
- daniel garry
- NON Member
- Posts: 841
- Joined: Mon Jun 15, 2009 1:20 pm
- Whats your location?: cavan
- Region: Western
- What Minis have you?: 1996 BRG mayfair 1275 auto-lyin up now
1990 1l city-daily driver
1993 cooper spi-completly stripped and upside down!
the long term project(advantage) courtesy of mr skelly!!
rotten shell-found a floor repair panel in the boot tho! - Contact:
Re: project "red devil"
theres a sleeve that connects the rod to the gearbox and yup, you can use brake fluid for the clutch. i usually start with the rear passenger side, rear drivers side, front passenger and front drivers, dont know why but i think i remember reading that you start with the furthest away from the master cylinder....could be wrong but it's not let me down!!
-
- NON Member
- Posts: 108
- Joined: Mon Jan 07, 2013 12:34 am
- Whats your location?: Louth
- Region: Eastern
- What Minis have you?: '88 Austin Mini
- Contact:
Re: project "red devil"
Very clean mini you have there dude. What year is it I can't seem to see it mentioned anywhere.
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
Re: project "red devil"
Thanks i payed enough for a bar shell but its perfect bar one rust issue
Its a 84/85 shell cant rember what was on the book
And as far as im aware the engine is out of a crashed 92
Its a 998 but they seem just as nippy as 1275's
Its a 84/85 shell cant rember what was on the book
And as far as im aware the engine is out of a crashed 92
Its a 998 but they seem just as nippy as 1275's
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
Re: project "red devil"
Right update time
Got an order in there of the last few weeks which contained all i need to finish (i think)
Got speical wheels real cheap only a 4 set but still cheap
Best item that came :
Got an order in there of the last few weeks which contained all i need to finish (i think)
Got speical wheels real cheap only a 4 set but still cheap
Best item that came :
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
Re: project "red devil"
Update on this too!
Plans have changed on the colour scheme of this car. In the last 6 months too many red/black mini have popped up. So I'm going with something i haven't seen in any IMM photo albums iv looked at or most of TMF.
Also i have put RC40 on blue mini so I'm making a de-cat pipe from my old exhaust and putting it on this car. I was thinking of putting a huge back box on it from a jap car something like 5-6 inch but im thinking of lowering so that wont be practical.
Update will fallow soon as im getting frustrated at looking at this car doing nothing
Plans have changed on the colour scheme of this car. In the last 6 months too many red/black mini have popped up. So I'm going with something i haven't seen in any IMM photo albums iv looked at or most of TMF.
Also i have put RC40 on blue mini so I'm making a de-cat pipe from my old exhaust and putting it on this car. I was thinking of putting a huge back box on it from a jap car something like 5-6 inch but im thinking of lowering so that wont be practical.
Update will fallow soon as im getting frustrated at looking at this car doing nothing
- joeyfinneran
- NON Member
- Posts: 876
- Joined: Wed Feb 03, 2010 1:13 am
- Whats your location?: roscommon
- Region: Western
- Location: roscommon town
- Contact:
Re: project "red devil"
A while ago we got a room re-carpeted in the house and i took the left over and used it in this car.
I think its totally different from the crowd exactly what im looking for with this car.
I also reused my old rust/scratched bumpers off the blue mini and wrapped them in sticker bomb
Sticker bomb is really a love or hate thing. Im one of the few that think its class an in the end its my car
Also have some other funky odd ideas for this car and cant wait to properly tackle into it
I think its totally different from the crowd exactly what im looking for with this car.
I also reused my old rust/scratched bumpers off the blue mini and wrapped them in sticker bomb
Sticker bomb is really a love or hate thing. Im one of the few that think its class an in the end its my car
Also have some other funky odd ideas for this car and cant wait to properly tackle into it
Who is online
Users browsing this forum: Ahrefs [Bot] and 2 guests