Welcome to the Irish Mini Owners Club Forum. Keep an eye out of on coming events!!!!
My 1980 1275gt
Moderators: spud1979, The Marcos Graveyard, Moderators
- hughesmarkie
- NON Member
- Posts: 149
- Joined: Mon Mar 13, 2006 11:20 pm
- Location: Dublin 14
- Contact:
My 1980 1275gt
Hey all, its been far too long since I’ve been on here and I have been meaning to get my ass along to a meet, a run or ebven the autojumble and catch up with whats being going on but usual crap has kept me occupied, work, other cars, kids etc. and of course getting married.
Which is what brings me to my latest build. I had decided unbeknownst to my wife that I would be having a mini as our wedding car and started the search over 18months ago. (I got married in May).
I located a good base car in the UK which was a 1275gt in old English white, needed a decent bit of work but I was confident of getting it completed for the big day.
Everything went to plan, better condition interior fitted, brown door cards, WP steering wheel, 12” minisports, maniflow exhaust & LCB, gearbox rebuild and fitted, electronic ignition, all went well except the arches I ordered got damaged in the post and had to be sent back to minisport and didn’t get a replacement in time for the wedding but I have them in the garage to fit in the next few weeks.
I still have a list of things I will be completing including, fitting new arches, re-building the carb etc. but heres a few pics of how she was on the big day
Engine Bay
In the workshop
Fitting the seats dash and interior
Parked up beside my daily petrol drinker
On the big day
Hope you like,
Mark
Which is what brings me to my latest build. I had decided unbeknownst to my wife that I would be having a mini as our wedding car and started the search over 18months ago. (I got married in May).
I located a good base car in the UK which was a 1275gt in old English white, needed a decent bit of work but I was confident of getting it completed for the big day.
Everything went to plan, better condition interior fitted, brown door cards, WP steering wheel, 12” minisports, maniflow exhaust & LCB, gearbox rebuild and fitted, electronic ignition, all went well except the arches I ordered got damaged in the post and had to be sent back to minisport and didn’t get a replacement in time for the wedding but I have them in the garage to fit in the next few weeks.
I still have a list of things I will be completing including, fitting new arches, re-building the carb etc. but heres a few pics of how she was on the big day
Engine Bay
In the workshop
Fitting the seats dash and interior
Parked up beside my daily petrol drinker
On the big day
Hope you like,
Mark
- The Marcos Graveyard
- IMOC Paid Member
- Posts: 4721
- Joined: Fri Feb 04, 2005 10:05 am
- Whats your location?: Longford
- Region: Eastern
- What Minis have you?: 1971 Mini Marcos.
1984 Mini Sprite - Modifications: 1380cc
Weber45
S/C CR gearbox and drop gears - Location: Longford
- Contact:
Re: My 1980 1275gt
Nice work and congrats.
Lovely to see the wedding guests admiring the consistency of the door gap on the GT in the last pic.
Lovely to see the wedding guests admiring the consistency of the door gap on the GT in the last pic.
- CB_Phil
- IMOC Paid Member
- Posts: 257
- Joined: Fri Feb 01, 2013 7:42 am
- Whats your location?: Dublin,
- Region: Eastern
- What Minis have you?: 1275 MkIII
- Modifications: Few bits
- Location: Dublin,
- Contact:
Re: My 1980 1275gt
Congrats on both the car & the big day.
Re: My 1980 1275gt
Looks great Mark, congrats on both counts!!
Also, another black and white GT we'll have to swap numbers to avoid arriving wearing the same thing in future
maxi
Also, another black and white GT we'll have to swap numbers to avoid arriving wearing the same thing in future
maxi
remember me, benny blanco from the bronx
- hughesmarkie
- NON Member
- Posts: 149
- Joined: Mon Mar 13, 2006 11:20 pm
- Location: Dublin 14
- Contact:
Re: My 1980 1275gt
Cheers lads,
Yes that would be very embarrasing Maxi, we must avoid such a fashion fowpa.... its bad enough copying the colour of benny, next ill be doing a BMW K conversion
Oh and TMG dont you meant the inconsistency of the door gap
Yes that would be very embarrasing Maxi, we must avoid such a fashion fowpa.... its bad enough copying the colour of benny, next ill be doing a BMW K conversion
Oh and TMG dont you meant the inconsistency of the door gap
- DaveC
- IMOC Paid Member
- Posts: 1532
- Joined: Sun Feb 06, 2005 10:52 pm
- Whats your location?: Dublin
- Region: Eastern
- Contact:
Re: My 1980 1275gt
Well done
-
- Comittee Member
- Posts: 1432
- Joined: Wed Feb 16, 2011 8:23 pm
- Whats your location?: wexford
- Region: Eastern
- What Minis have you?: 1961 Morris Mini mk1
1961 Morris Irish Van
1969 Austin Mini irish mk2
1973 Clubman estate
1980 Clubman GT - Contact:
Re: My 1980 1275gt
Looks savage
- hughesmarkie
- NON Member
- Posts: 149
- Joined: Mon Mar 13, 2006 11:20 pm
- Location: Dublin 14
- Contact:
Re: My 1980 1275gt
Well lads an update and not a good one Im afraid
Came out the other morning to be greeted by this
Needless to say I was absolutely raging at first, followed closely by sorrow for my poor mini.
As you can see from the pics the little scrotes tried to pry the door open with a screwdriver or something, bent the door and shattered the window, they then proceeded to break the steering lock, cowling and indicator stalk... its the lumps out of the paint that's the worst in my eyes
I have a hidden cut-off switch/immobiliser fitted so it wasn't going to start for them, and the worst part is I have a brand new alarm in the workshop been waiting to be fitted for the last 2 months (that will teach me to put things on the long finger).
Anyway good news is all covered by insurance and the quote has been issued and agreed, so Im in this weekend to get cracking on getting her back to looking her best, pics to follow once all is sorted
Mark
Came out the other morning to be greeted by this
Needless to say I was absolutely raging at first, followed closely by sorrow for my poor mini.
As you can see from the pics the little scrotes tried to pry the door open with a screwdriver or something, bent the door and shattered the window, they then proceeded to break the steering lock, cowling and indicator stalk... its the lumps out of the paint that's the worst in my eyes
I have a hidden cut-off switch/immobiliser fitted so it wasn't going to start for them, and the worst part is I have a brand new alarm in the workshop been waiting to be fitted for the last 2 months (that will teach me to put things on the long finger).
Anyway good news is all covered by insurance and the quote has been issued and agreed, so Im in this weekend to get cracking on getting her back to looking her best, pics to follow once all is sorted
Mark
- macker
- NON Member
- Posts: 1950
- Joined: Mon May 23, 2005 5:30 am
- Whats your location?: THE FRIDGE
- Region: Aboard
- What Minis have you?: 110bhp 1968 mkII
- Modifications: NEW Custom flakey paint
- Location: The Fridge I told ye!!
- Contact:
Re: My 1980 1275gt
little scrotes!!
ought to be hung drawn and quartered!
thank god they didn't totally trash it!
ought to be hung drawn and quartered!
thank god they didn't totally trash it!
-
- IMOC Paid Member
- Posts: 2680
- Joined: Thu Feb 10, 2005 9:44 pm
- Whats your location?: Between an A series and a G13B
- Region: Eastern
- What Minis have you?: 61 van,68 MKII,
75 Clubman estate,
80 1275GT
91 RSP Cooper - Location: Between an A series and a G13B
- Contact:
Re: My 1980 1275gt
At least insurance is covering it and thanks to the kill switch then did not get it away.Maybe it was Maxi trying to be the only white GT in town,has he an alibi.
Real Clubmans have a square nose.Seriously.
- hughesmarkie
- NON Member
- Posts: 149
- Joined: Mon Mar 13, 2006 11:20 pm
- Location: Dublin 14
- Contact:
Re: My 1980 1275gt
Yeah I'm just glad the damage wasn't as bad as it could have been...
From a few other car forums I'm on there appears to be a bit of a spike in the number of cars being stolen or attempted in the last few weeks...
From a few other car forums I'm on there appears to be a bit of a spike in the number of cars being stolen or attempted in the last few weeks...
-
- NON Member
- Posts: 720
- Joined: Sat May 16, 2009 9:08 pm
- Whats your location?: tallaght dublin 24
- Region: Southern
- What Minis have you?: leyland mini clubman 76 saloon
- Modifications: painted in granit graey. 1293 engine block bored out too 1312. sw5 cam .1.5 high lift rolling rockers. electrionic fuel pump .webber 45 carb. millennium rc40 exhuast system center exit. copper 10inch brake set up .and dunlop d1s alloys .
- Location: co.dublin
- Contact:
Re: My 1980 1275gt
Dirty animals
-
- NON Member
- Posts: 224
- Joined: Fri Aug 01, 2008 10:58 am
- Whats your location?: Lucan, Dublin.
- Region: Eastern
- What Minis have you?: 1997 mini cooper
- Location: Lucan, Dublin.
- Contact:
Re: My 1980 1275gt
Scumbags! Braindead in more ways than one, as they hadn't even choked the engine going by the pics.
Glad to hear the claim was straightforward.
Glad to hear the claim was straightforward.
MINI
...where size doesn't matter!
...where size doesn't matter!
Re: My 1980 1275gt
ah man, what dickheads! good job on the killswitch. it could have been a lot worse.
theres a huge increase in the theft of minis, and classics in general in the UK at the moment
(just take a quick look on retrorides) so the more difficult we make it for the ****ers the better!
theres a huge increase in the theft of minis, and classics in general in the UK at the moment
(just take a quick look on retrorides) so the more difficult we make it for the ****ers the better!
remember me, benny blanco from the bronx
- keith
- NON Member
- Posts: 2117
- Joined: Tue Jul 18, 2006 11:15 pm
- Whats your location?: Dún Laoghaire, Dublin
- Region: Eastern
- What Minis have you?: '93 SPi cooper
- Location: Dún Laoghaire, Dublin
- Contact:
Re: My 1980 1275gt
gutted, but glad to see you still have the car - i had one taken (a few years ago it has to be said) and they rolled it on the roof and kicked all the glass out of it when they finished lashing it around the campsite.
Signature still awaiting top-coat and lacquer....
- CB_Phil
- IMOC Paid Member
- Posts: 257
- Joined: Fri Feb 01, 2013 7:42 am
- Whats your location?: Dublin,
- Region: Eastern
- What Minis have you?: 1275 MkIII
- Modifications: Few bits
- Location: Dublin,
- Contact:
Re: My 1980 1275gt
Gutted for you, least they didn't get her & you're covered on the insurance. Hopefully they get what they deserve some day
- hughesmarkie
- NON Member
- Posts: 149
- Joined: Mon Mar 13, 2006 11:20 pm
- Location: Dublin 14
- Contact:
Re: My 1980 1275gt
Cheers lads, yeah and in fairness Axa were good to deal with, first claim Ive ever had to make in 16years of driving. Also Ive started the job of ordering whats needed and getting her sorted in the next few weeks
- hughesmarkie
- NON Member
- Posts: 149
- Joined: Mon Mar 13, 2006 11:20 pm
- Location: Dublin 14
- Contact:
Re: My 1980 1275gt
Finally a bit of an update
So I stripped all the broken and damaged bits out, Ignition has been rewired and new steering lock/barrel fitted, Along with a new cowling.
The drivers new glass is ordered and due to arrive tomorrow and next is to sort the passenger door out before sending off for painting.
Now as I was stuck waiting for the green tinted glass I decided to complete the conversion to 10" wheels as I had a nice set of split rims on Avons I thought would look the part, so heres a few pics...
Up next is a new set of arches to cover the new wheels, and get them sprayed when Im getting the door done
fit the Spax dampers and adjustable cones / knuckle joints I have waiting to go on her
And change from a mechanical fuel pump to a facet solid state
So I stripped all the broken and damaged bits out, Ignition has been rewired and new steering lock/barrel fitted, Along with a new cowling.
The drivers new glass is ordered and due to arrive tomorrow and next is to sort the passenger door out before sending off for painting.
Now as I was stuck waiting for the green tinted glass I decided to complete the conversion to 10" wheels as I had a nice set of split rims on Avons I thought would look the part, so heres a few pics...
Up next is a new set of arches to cover the new wheels, and get them sprayed when Im getting the door done
fit the Spax dampers and adjustable cones / knuckle joints I have waiting to go on her
And change from a mechanical fuel pump to a facet solid state
- BERT
- NON Member
- Posts: 485
- Joined: Tue Jun 16, 2009 2:48 pm
- What Minis have you?: Mini miglea 1480cc
81' clubby estate - Location: Greystones,co Wicklow
- Contact:
Re: My 1980 1275gt
Must get the finger out and get my own clubby back on the road!
- hughesmarkie
- NON Member
- Posts: 149
- Joined: Mon Mar 13, 2006 11:20 pm
- Location: Dublin 14
- Contact:
Re: My 1980 1275gt
I remember seeing the thread on your clubby... a beauty, is yours in storage or do you need to do a bit of work?
Re: My 1980 1275gt
hmmm, think the 10's look a bit wierd man. i reckon you should go sportpack 13's with a hornet flip front
seriously tho, looks fab and some great mods. its soooooooo clean!!!
seriously tho, looks fab and some great mods. its soooooooo clean!!!
remember me, benny blanco from the bronx
-
- IMOC Paid Member
- Posts: 2680
- Joined: Thu Feb 10, 2005 9:44 pm
- Whats your location?: Between an A series and a G13B
- Region: Eastern
- What Minis have you?: 61 van,68 MKII,
75 Clubman estate,
80 1275GT
91 RSP Cooper - Location: Between an A series and a G13B
- Contact:
Re: My 1980 1275gt
10s really suit the Clubman in my opinion,like the split rims as well.
Real Clubmans have a square nose.Seriously.
- hughesmarkie
- NON Member
- Posts: 149
- Joined: Mon Mar 13, 2006 11:20 pm
- Location: Dublin 14
- Contact:
Re: My 1980 1275gt
It was a toss of a coin to go the 13" sportspack routemaxi wrote:hmmm, think the 10's look a bit wierd man. i reckon you should go sportpack 13's with a hornet flip front
seriously tho, looks fab and some great mods. its soooooooo clean!!!
Cheers Maxi , Its not quite as clean as id like, a few bits I want to tidy in the coming weeks
@kerryminiringo I agree its gotta be 10's on a slab front IMO
- BERT
- NON Member
- Posts: 485
- Joined: Tue Jun 16, 2009 2:48 pm
- What Minis have you?: Mini miglea 1480cc
81' clubby estate - Location: Greystones,co Wicklow
- Contact:
Re: My 1980 1275gt
10s look great! Mines up in the garage with no engine and in need of front floor pans, finding it hard to get time to get it back together
Who is online
Users browsing this forum: No registered users and 0 guests