Bought a set of 2nd hand Wipac Spots (H3 bulbs).
What is the best way to wire them?
Welcome to the Irish Mini Owners Club Forum. Keep an eye out of on coming events!!!!
Wiring spots
Moderators: spud1979, The Marcos Graveyard, Moderators
-
woody
- IMOC Paid Member
- Posts: 2837
- Joined: Mon Feb 07, 2005 11:55 pm
- Whats your location?: Drogheda
- Region: Eastern
- What Minis have you?: Traveller
Turbo
Hornet
Equinox
MINI Clubman - Location: LOUTH
- Contact:
Re: Wiring spots
You'll need a relay, inline fuse and opitional switch. You can have the spots always come on with the main beam or have a switch which will control if they come on or not but they must only come on with the main beam for the NCT.
Connect one side of your fuse to the Brown wires at the fuseboard and the other side to the relay ( 30) .
Connect relay output (87) to your spots
Connect relay coil (85) to earth
Connect relay coil (86) to Blue/White feed to main beams either directlly or via switch.
Connect one side of your fuse to the Brown wires at the fuseboard and the other side to the relay ( 30) .
Connect relay output (87) to your spots
Connect relay coil (85) to earth
Connect relay coil (86) to Blue/White feed to main beams either directlly or via switch.
TECHNICAL MODERATOR
Who is online
Users browsing this forum: No registered users and 10 guests
