Su carb

[minionly]

I have this su carb in the shed right and it has a tag with some letters and numbers on could it be identyfied by these numbers??

[Evlabe]

Yes that's the identification tag. Put the numbers into google

[minionly]

Wat do i do just google the numbers

[minionly]

Ok cook its a hif 44 just need to get a rebuild kit and someone to do it anytakers

[Evlabe]

I got a service kit for a hif44 last week kit is CSK75 from minispares. Stripped the carb down to every nut and bolt, cleaned it with warm soapy water and rebuilt it with new seals etc. took bloody ages to figure out the springs but other than that worked perfectly. You can get the full rebuild kit but unless the parts are warn there is no need. Take loads of pictures as you dismantle it and all will be well !!!!

[minionly]

How much was the kit i dnt want to do it

[Evlabe]

Kit was about €35. You get the kit and send me the carb and I'll do it for you if you want

[minionly]

Is there much wotk in doing it i might give it a try

[woody]

Take pics of linkage an springs before dismanteling, it does get confussing

[minionly]

wat get replaced exactly when rebuilding the carb
woody

[woody]

The main reason to refurb a carb is wear in bushes that support the shaft and butterfly, and ware in the petrol needle in the float chamber.Personally I just partially strip and clean with carb cleaner and unless there is obvious wear rebuild it as is. The only carb I have fully refurbed is on the turbo which runs positive and negitive pressure an has more seals than standard.The main thing with any carb is get everything clean.

[The Marcos Graveyard]

Use a heated ultrasonic tank and a media tumbler for the best results.