Welcome to the Irish Mini Owners Club Forum. Keep an eye out of on coming events!!!!
underbody sealant...
Moderators: spud1979, The Marcos Graveyard, Moderators
-
- NON Member
- Posts: 360
- Joined: Thu Jun 11, 2009 11:55 pm
- Whats your location?: Firhouse
- Region: Eastern
- What Minis have you?: '90 mini 998cc
- Modifications: Straight through exhaust, bucket seats stage 1, 12x6 matt black revo's, matt black paint job(work in progress)
- Location: Firhouse
- Contact:
underbody sealant...
I'm in the middle of giving my mini a respray, so I decided I may as well go the whole nine yards, strip it right back, engine out and everything.
My question is, what would be the best underbody sealant?
And which would give the best form of sound deadening?
I've make up a boot liner to cover the fuel tank and spare wheels so i'm going to give the inside of the boot and the battery box a good coating too, do you think this will deaden rattle and road noise to some extent?
Cheers in advance lads!
Sean
My question is, what would be the best underbody sealant?
And which would give the best form of sound deadening?
I've make up a boot liner to cover the fuel tank and spare wheels so i'm going to give the inside of the boot and the battery box a good coating too, do you think this will deaden rattle and road noise to some extent?
Cheers in advance lads!
Sean



-
- NON Member
- Posts: 213
- Joined: Sat Oct 04, 2008 8:17 am
- Whats your location?: celbridge co kildare
- What Minis have you?: 92 city and 83 leyland 1000
- Modifications: zeemax kit 1330 engine
- Contact:
Re: underbody sealant...
hi i have used schutz on my mini very easy to apply with a compressor and very cheap too 7 yoyos a can it looks like tar on the underside of the car and makes it look like brand new
-
- NON Member
- Posts: 360
- Joined: Thu Jun 11, 2009 11:55 pm
- Whats your location?: Firhouse
- Region: Eastern
- What Minis have you?: '90 mini 998cc
- Modifications: Straight through exhaust, bucket seats stage 1, 12x6 matt black revo's, matt black paint job(work in progress)
- Location: Firhouse
- Contact:
Re: underbody sealant...
where can i pick it up?
I don't have a compressor so i'd prefer something tat was aerosol or brush on
I don't have a compressor so i'd prefer something tat was aerosol or brush on


Re: underbody sealant...
i use por15 and get it from frost in the uk, it can be brushed on and sticks well, halfords should sell shutz but any motor factors should be able to get it i supose.
ive seen a waxol underseal can that takes a pump spray nozzel that may also work well..
ive seen a waxol underseal can that takes a pump spray nozzel that may also work well..
- CLUBMANGT
- NON Member
- Posts: 1076
- Joined: Fri Oct 23, 2009 8:59 pm
- Whats your location?: Leopardstown
- Region: Eastern
- What Minis have you?: 86 Mayfair 1000GT
- Modifications: 1275 and bar the shell and subframes new everything!! IMOC MEMBER
- Location: Leopardstown
- Contact:
Re: underbody sealant...
I use the white or grey its over paintable , but I do have a compressor . Dont know if it comes in rattle can form but good stuff ok paint over with body colour and it looks foctory fresh . 

ALL YOU NEED IS POWER AND LOADS OF IT!!!
Who is online
Users browsing this forum: No registered users and 0 guests