Welcome to the Irish Mini Owners Club Forum. Keep an eye out of on coming events!!!!

adjusting the shocks

General MINI related posts. Open to all, registration required

Moderators: spud1979, The Marcos Graveyard, Moderators

Post Reply
sanguiss
NON Member
Posts: 77
Joined: Mon Jun 15, 2009 7:12 pm
Contact:

adjusting the shocks

Post by sanguiss »

Hi guys, starting to mess around with the recently acquired mini, named Hollie, btw, so from now on I'll refer to her as Hollie. Well, I have the spax adjustable shocks, I believe, there are no coils, so I don't think it's the coil over kit, (if I'm worng don't hesitate to throw the first stone... ;-) ). As the shocks are set at the moment it's like driving a tank, a very light one, thanks god I don't have the habit of drinking coffee when I'm driving... so I'd like to get the shocks softer; the manual I found online recommends starting with 8 clicks from soft in the front and 6 in the back, has anybody expreience with more customized settings?
Cheers, Sergio.


User avatar
The Marcos Graveyard
IMOC Paid Member
Posts: 4718
Joined: Fri Feb 04, 2005 10:05 am
Whats your location?: Longford
Region: Eastern
What Minis have you?: 1971 Mini Marcos.
1984 Mini Sprite
Modifications: 1380cc
Weber45
S/C CR gearbox and drop gears
Location: Longford
Contact:

Re: adjusting the shocks

Post by The Marcos Graveyard »

I used to set them to 4 on the front 1 on the back.
Image

A fully carbon fiber Mini Marcos shell weighs just 7.25kg.
wzd345
NON Member
Posts: 206
Joined: Thu Feb 03, 2005 10:43 pm
Location: Fyfield, Essex
Contact:

Re: adjusting the shocks

Post by wzd345 »

I used 6 front and 4 back, found it quite firm and good for more 'progressive' driving style.
Buddy
NON Member
Posts: 284
Joined: Mon Nov 05, 2007 2:45 pm
Contact:

Re: adjusting the shocks

Post by Buddy »

I HAVE THE KONI CLASSICS ON MY SPORTSPACK (I THINK THEY CAME AS STANDARD ON THE SPORTSPACK)

THEYRE NOT ADJUSTABLE ARE THEY?
User avatar
The Marcos Graveyard
IMOC Paid Member
Posts: 4718
Joined: Fri Feb 04, 2005 10:05 am
Whats your location?: Longford
Region: Eastern
What Minis have you?: 1971 Mini Marcos.
1984 Mini Sprite
Modifications: 1380cc
Weber45
S/C CR gearbox and drop gears
Location: Longford
Contact:

Re: adjusting the shocks

Post by The Marcos Graveyard »

The Koni's are an uprated shock, but non adjustable.
Image

A fully carbon fiber Mini Marcos shell weighs just 7.25kg.
sanguiss
NON Member
Posts: 77
Joined: Mon Jun 15, 2009 7:12 pm
Contact:

Re: adjusting the shocks

Post by sanguiss »

OK, so in general as I can see you all go softer than the settings suggested by the manufacturer, good to know. thanks a lot.
Sergio.
User avatar
macker
NON Member
Posts: 1950
Joined: Mon May 23, 2005 5:30 am
Whats your location?: THE FRIDGE
Region: Aboard
What Minis have you?: 110bhp 1968 mkII
Modifications: NEW Custom flakey paint
Location: The Fridge I told ye!!
Contact:

Re: adjusting the shocks

Post by macker »

the Koni's are an adjustable shock, the only snag is that they are not "on car" adjustable,

they have to be taken off the car, then their is an insert/collar (plastic washer type thing) in the cup part of the shock that needs to be removed,
once removed you compress the shock and twist, it should catch its markers and click each degree softer or harder,
cant remember how many clicks their are though but it is more than the Spax,
then you just insert the collar again and refit to the mini,

bit of a pain if you've never used them before as you'll have to do this a few times to get your desired setting
iirc i used to set them at 7 front and 3 or 4 rear
ImageImageImage
Jason79
NON Member
Posts: 188
Joined: Tue Aug 19, 2008 1:19 pm
Whats your location?: -
Region: Western
Location: Carrick on Shannon,Roscommon
Contact:

Re: adjusting the shocks

Post by Jason79 »

dos these same settings apply for gas shocks aswell??

jason
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests