Irish Mini Owners Club

Evening all, Having a clear out Located in limerick, but can over next two week facilitate delivery anywhere between limerick and cork Parts as follows: Passenger side door with impact bar, excellent condition :... 280 euro Hs4 carb:... 50 euro K&N cone filter, offset... 50 euro K&N pancake ...

Butyl is a better sound deadening material, dynamat, fatmat, silent coat all use this material

best bang for buck i've used in sound deadening is silent coat.

what to watch out for is density per square meter. the higher the better.

I was only talking to a mechanic friend about this over the weekend about a similar problem one of his customers was having with there 08 mini. These cars are know to consume alot of oil, not unusual to used 3 to 4 litres per 12000 miles What happens is when the oil goes so low the timing chain tens...

i second Ray Cunningham in the Galway Mini Center,
wicked nice guy and really knows what he is doing

hows the floor, sills and boot floor.

any rust on roof, is it letting in any water

can you post pics of the rust and areas that need attention please

if your interested in splitting the parts i'd take the shell and all body parts (Bare subframes, windows, bumpers, glass, lights, doors, bonnet and boot.) off you. or if anyone wants just the mechanical part let me know and we will try to come to some agreement. i've cash waiting for body shell if y...

is it possible you can post photo's of the major rust areas.

also is there an engine going with car and how does it run

thanks

danny

3M VHB tape

Just hide it behind the front number plate. get a good one as it will get covered in everything.

or

http://www.kenwood-electronics.co.uk/pr ... AB-Aerial/

the company you mention is Galvotech i think but is located in shannon. they don;t have the capability of plating a full car but will do parts no problem minimum cost is 75 euro. you need to have parts stripped of everything before bringing it in any paint or rust he will tell you no. they don't off...

just the brake pedal,
replace it with the one off a servo car.

very good kit at moment

http://www.aseriesspares.co.uk/alarms-/ ... _1171.html

short block engines have 8v heads big blocks have the 16v the fuel economy would not be that bad, if you go injected you can tailor the system to your driving style. check out http://www.specialist-components.co.uk/ or http://www.force-racing.co.uk/ both companies do these kits. also check out http:...

looking good billy, looks like a different car than it did last weekend.

tell me this, was it bead or soda blasted.

looking forward to seeing results of blasting

thanks lads,
time to source a kent 266, this cam is too wild for my application.

the more i look at it, it could be a 9, just not fully formed.

opinions???

almost 100% sure, well 99.99999999%
pics attached

Morning all. I've a camshaft at home i was hoping someone may be able to help me identify it's cam out of a metro 998 engine i was told had a high lift cam in. there are no ridges on the cam to identify it, there is a number stamped into the camshaft AEA 640 the other unusual part of the cam is it h...

kemppi MinarcMig Adaptive 170/180

anyone know the spec of this engine

i think it's a bmw twin cam with rotrex charger but can't find official spec anywhere.
very curious how they kept it under 1000cc

i want an ideal compression ratio between 10:1 and 10.5:1 you need approximately 40 thou skim for use with flat top pistons (all A+) and approximately 80 thou skim for use with the dished pistons that many pre A+ engines use. I'm looking for head chamber volume of around 24.5cc UN-skimmed with flat ...

thanks for that jpcos, will give them a ring